Télécharger Imprimer la page

Domo DO702BL Mode D'emploi page 23

Publicité

Les langues disponibles
  • FR

Les langues disponibles

BEFORE THE FIRST USE
Assemble the appliance following these steps:
1.
Position the seal on the blade assembly. Screw the unit clockwise onto the glass
container.
2.
Turn the measuring cup clockwise into the lid and place the lid on the glass container so
that the pouring spout and the recess in the lid line up.
3.
Position the container with lid on the motor block. The blender is now ready for use.
USE
1.
Make sure that the speed regulation button is at "0".
2.
Put the plug in the outlet and position the glass container on the engine block.
3.
Fill the glass container with the desired ingredients, between the minimum (0.5 l) and
maximum (1.75 l) indication lines.
4.
Position the lid with measuring cup on the container and turn the speed regulator to the
desired speed:
Position 1-2: for light liquids
Position 3-5 for thicker fluids and solid foods
5.
For quick and accurate blending, turn the speed knob to the pulse function (to the left of
0) and hold for a few seconds. When you release the knob, it will automatically reset itself
to the 0 position. You can do this a few times in a row, until the desired
been reached.
6.
If you want to add ingredients while you are blending, remove the measuring cup from
the lid and put the extra ingredients into the jar through this fill opening.
7.
When crushing ice or blending hard foods, keep 1 hand firmly onto the lid.
8.
Turn off the blender by setting the speed knob to 0.
9.
Unplug the blender after use.
Caution:
· For each use, the consecutive operation time should not exceed 3 minutes. Between two
continuous cycles at least 10 minutes resting time should be maintained. The appliance
needs to cool down to room temperature before starting the next blending cycle.
· Never use boiling liquids or do not use the blender when the jar is empty.
CLEANING AND MAINTENANCE
1.
Pour some warm soapy water into the jar and turn the speed knob for a few seconds to
the pulse function. Empty the jar.
2.
Unplug the blender before continuing with cleaning.
3.
Always clean the blender immediately after us for easy cleaning. Do not let food dry in
the jar or the blade assembly, this will make them harder to clean.
www.domo-elektro.be
consistency has
DO702BL
23

Publicité

loading