Vissani AP06CR1SKW Guide D'utilisation Et D'entretien page 8

Installation (continued)
2a
Installing in Vertical Sliding Window
NOTE: The window installation kit can be used with vertical
sliding windows between 18 in. and 50 in. wide.
□ Cut the foam seal (LL) (adhesive type-long) and foam seal
(MM) (adhesive type-shorter) to the proper length, and
attach it to the window sash and frame.
□ Insert the vent panel assembly, including extension panels,
if needed, into the window opening.
□ Extend the extension panels to the window width.
□ Cut the foam seal A (non-adhesive type) to the window
width. Stuff the foam seal A between the glass and the
window to prevent air and foreign objects from getting into
the room.
□ Install the window-lock bracket (GG) with screw (FF)
as shown, if needed.
FF
8
MM
LL
II
HH
AA
GG