Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting
Before calling for service, please try the suggestion below.
1
Air Conditioner will not operate
WARNING: Electrical Shock Hazard
Plug into a grounded 3-prong outlet. Do not remove ground
prong. Do not use an adapter. Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or
electrical shock.
1. The power supply cord is unplugged. Plug into a grounded 3 prong outlet. See "Electrical Requirements" on page 4.
2. Time-delay fuse or circuit breaker of the wrong capacity is being used. Replace with a time-delay fuse or circuit breaker of the correct
capacity. See "Electrical Requirements".
3. The power supply cord has tripped (Reset button has popped out). Press and release RESET (listen for click; Reset button will latch and
remain in) to resume operation.
4. A household fuse has blown, or a circuit breaker has tripped. Replace the fuse, or rest the circuit breaker. See "Electrical
Requirements" on page 4.
5. The On/Off button has not been pressed. Press ON/OFF.
6. The local power has failed. Wait for power to be restored.
2
Air Conditioner blows fuses or trips circuit breakers
1. Too many appliances are being used on the same circuit. Unplug or relocate appliances that share the same circuit.
2. You are trying to restart the air conditioner too soon after turning off air conditioner. Wait at least 3 minutes after turning off air
conditioner before trying to restart the air conditioner.
3
Air conditioner power supply cord trips (Reset button pops out)
1. Disturbances in your electrical current can trip (Reset button will pop out) the power supply cord. Press and release RESET (Listen for
click; Rest button will latch and remain in) to resume operation.
2. Electrical overloading, overheating, cord pinching or aging can trip (Reset button will pop out) the power supply cord.
3. After correcting the problem, press and release RESET (Listen for click; Reset button will latch and remain in) to resume operation. If
the power cord fails to rest, contact a service technician.
NOTE: A damaged power supply cord must be replaced with a
new power supply cord obtained from the product manufacturer
and must not be repaired.
18
Publicité
