Publicité
Les langues disponibles
Les langues disponibles
Operation (continued)
2
Using the Remote Control (continued)
TIMER
□ Use the TIMER function to turn the air conditioner ON/OFF automatically.
Setting the Air Conditioner to Turn On:
1. Plug in the air conditioner and use the remote to power it ON.
2. Use the remote to set the desired mode, temperature, fan speed, etc.
3. Use the remote to power OFF the air conditioner.
4. Press TIMER on the remote and use the UP /DOWN buttons to set the desired delay time until the air conditioner
turns ON. The delay time can be set from O to 24 hours in one-hour increments.
5. Press TIMER again to confirm the delay time. The TIMER light on the unit will be on.
Setting the Air Conditioner to Turn Off:
1. Plug in the air conditioner and use the remote to power it ON.
2. Use the remote to set the desired mode, temperature, fan speed, etc.
3. Press TIMER on the remote and use the UP /DOWN buttons to set the desired delay time until the air conditioner
turns OFF. The delay time can be set from O to 24 hours in one-hour increments.
4. Press TIMER again to confirm the delay time. The TIMER light on the unit will be on.
To Cancel Timer:
Press the TIMER button again. Once a "beep" is heard and the indicator disappears, the TIMER mode has been canceled.
NOTE: The TIMER function can only be set by the remote control.
SWING
□ Press SWING once to change the vertical airflow direction.
□ Press again to hold the louver in a desired position.
NOTE: Swing function is not available on this model.
3
Normal Sound
When your air conditioner is operating normally, you may hear sounds such as:
1. Air movement from the fan.
2. Clicks from the thermostat cycling.
3. Vibration or noise due to poor wall or window construction.
4. A high-pitched hum or pulsating noise caused by the high-efficiency compressor cycling on and off.
15
Please contact 1-855-673-7747 for further assistance.
HOMEDEPOT.CA
Publicité
