Publicité
Les langues disponibles
Les langues disponibles
Programme cycle
Laundry can be added to the tumble dry-
er during the programme cycle. Press the
button to open the door [1 . After the
laundry has been inserted, close the door
and press the start button again * .
Once the desired drying temperature has
been reached, the cooling down phasé
will commence. The heating is now
approximately 10 minutes and cooled
down in the air flow.
After the cool tumble
cycle, the pro-
gramme has been completed and the
laundry can be removed from the tumble
dryer. The „filter * " lamp will light up
(certain machine types only). The 30-
minute (approx.) crease-protection phase
will follow (unless it has been cancelled).
Programme end
• The „empty reservoir 44. " indicator
lamp will light up
• Turn the programme selection dial to
the Off position I
• Clean the lint filter (see page 41)
• Empty the condensation water reservoir
(see page 41).
40
Publicité
