VINCENT DAC-700 Manuel D'utilisation page 37

Operation
Switch on and off
Select input source
Switch between tube
amplification and
transistor amplification
Volume of the connected
headphones (7)
Mute the DAC
OPERATING THE APPLIANCE
Button(s) Description
The DAC is switched on and off using this button at the front panel. After
POWER (2) switching on, the device needs up to 30 seconds before it is ready to ope-
rate.
With this button, you can select between four input sources (AES/EBU,
SELECT
USB, Coaxial IN and Optical IN). By pressing this button, the player
(3) (18)
changes to the playback of the device connected thereto.
This switch allows you to choose if the converted music signal that is read
from the CD is amplified to the output level using the internal TUBE amplifier
TUBE/FET
(5) or the internal FET transistor amplifier. This selection can only be made on the
front panel.
This function can only be operated on the front of the device. Turn the dial
"LEVEL" clockwise to increase the volume in the headphones and anticlockwi-
se to reduce the volume. This volume control has no effect on the output level
LEVEL (7)
of the analogue "ANALOG OUTPUTS" (8) on the back of the device.
The MUTE function can be activated with the remote control (17). It switches off
MUTE (17)
the outputs (8).
Vincent
37