Télécharger Imprimer la page

Grundig DTR 5000 Mode D'emploi page 33

Publicité

Les langues disponibles

Les langues disponibles

CONNECTION AND PREPARATION
WLAN connection to the internet
Telephone socket
Media servers on
hard drive (NAS-
Network Attached
Storage)
Notes:
The quality of the radio signal depends on
7
the distance between the device and your
modem/router.
The substance of the building at the installa-
7
tion site can also affect this.
SETTINGS
Menu navigation
Press and hold »Menu/INFO« on the device
or MENU on the remote control, select »Main
menu« using » « or » « or by turning the Volume
knob, and confirm by pressing the Volume knob or
»OK« on the remote control.
If you wish to view the previous menu,
press » «
on the remote control or press
»ALARM/BACK
« on the device.
First Installation using the instal-
lation assistant "Wizard"
When you connect the device to the mains, or af-
ter factory reset, the display will show the Grun-
dig logo. The Wizard installation assistant then
appears, which guides you through the installa-
tion step by step.
Splitter
Modem/Router
DTR 5000 2.0 BT DAB+ WEB / TR 3200 BT DAB+ WEB
---------------------------------------------------------------------------------------------------------------------------------------
Laptop
Note:
The lines represent the function.
Internet radio
Music archive (audio streaming)
WLAN
Notes:
For Wi-Fi connection, please make sure, that
7
the Wi-Fi router is switched on.
The network name (SSID) must be visible and
7
the MAC address of the device may be en-
tered in the Wi-Fi router.
Perform the registration process in the prox-
7
imity of the router in order to avoid problems
with the Wi-Fi range.
Start First Installation
1
First switch on, the device enters setup Wizard
directly.
– Display: »Setup wizard« menu opens.
2
Select the push button »YES« by pressing
» « or » « or by turning the Volume Knob and
confirm by pressing »OK«.
– Display: »Language« menu opens.
---------------------------------------
ENGLISH
33

Publicité

loading