Focusrite Scarlett 18i8 Guide De L'utilisateur page 20

Masquer les pouces Voir aussi pour Scarlett 18i8:

NOTE: You run the risk of creating an audio feedback loop if loudspeakers are active at the same time

as a microphone! We recommend that you always mute (or turn off) monitoring loudspeakers while

recording, and use headphones when overdubbing.

Speaker Switching (Main/ALT)

The 18i8's ALT function makes adding a second pair of monitors very easy: simply connect the second

pair to LINE OUTPUTS 3 and 4. After enabling

then switch between your main monitors and the secondary pair by clicking on the on-screen

ALT

and

buttons . When ALT is active, the main mix output will be fed to the LINE OUTPUTS 3 and 4

instead of 1 and 2, and the green ALT LED will light to confirm this.

Note that as you switch between

in use are muted. When

(for safety); you will need to unmute the appropriate outputs in Focusrite Control. Please see the

Focusrite Control manual for more details of Speaker Switching.

Secondary

Monitors

(Active)

MAIN

and

Speaker Switching

ALT

Monitors

(Passive)

ALT

, the Line Outputs feeding the pair of speakers not

is disabled, Line Outputs 1 to 4 are all initially muted

in Focusrite Control, you can

MAIN

Main

MAIN