Télécharger Imprimer la page

Ryobi RY18LMX40C-240 Mode D'emploi page 7

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8
The blade bolts must be adequately tightened.
See the manufacturer's recommendations for
blade bolt torque, which can be found in the
product specification table in this manual.
CLEARING BLOCKAGES
Turn off the product, and remove the isolator
key and the battery pack. Make sure that all
moving parts have come to a complete stop.
Always wear heavy-duty gloves when checking
or clearing a blockage. The blades are sharp,
and the blockage itself could be a sharp object.
Remove the grass catcher. Check and carefully
clear the grass catcher for obstructions.
Check the grass discharge chute, and
carefully clear blockages.
Turn the product on its side. Check its
underside and the area around the blade.
Carefully remove any blockages. Remember
that the blade may move during cleaning.
KNOW YOUR PRODUCT
See page 145.
1.
Start button
2.
On/Off lever
3.
Motor control cable
4.
Telescopic handle
5.
Handle lock clip
6.
Isolator key
7.
Grass catcher
8.
Cutting height adjustment lever
9.
Quick-release fastener
10. Battery door
11. Rear wheel
12. Front wheel
13. Mulching plug
14. Operator's manual
15. Battery pack
16. Charger
SYMBOLS
Read and understand all
instructions before operating the
product. Follow all warnings and
safety instructions.
Wear eye and ear protection.
Do not operate the product on
inclines greater than 15°. Mow
across the face of slopes, never
up and down.
Beware of sharp blades.
Blades continue to rotate
after the motor is switched off .
Remove the isolator key before
maintenance.
Do not expose the product to
rain or damp conditions.
Beware of thrown or fl ying
objects. Keep all bystanders,
especially children and pets,
at least 15m away from the
operating area.
Guaranteed sound power level
In-use battery compartment
Storage battery compartment
Do not dispose of waste
batteries, waste electrical
and electronic equipment as
unsorted municipal waste. Waste
batteries and waste electrical
and electronic equipment must
be collected separately. Waste
batteries, waste accumulators,
and light sources have to be
removed from the equipment.
Check with your local authority
or retailer for recycling advice
and collection point. According
to local regulations, retailers
may have an obligation to
take back waste batteries and
waste electrical and electronic
equipment free of charge. Your
contribution to the reuse and
recycling of waste batteries and
waste electrical and electronic
equipment helps to reduce the
demand of raw materials. Waste
batteries, in particular containing
lithium, and waste electrical
and electronic equipment
contain valuable and recyclable
materials, which can adversely
impact the environment and the
human health if not disposed of
in an environmentally compatible
manner. Delete personal data
from waste equipment, if any.
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
EL
7

Publicité

loading

Ce manuel est également adapté pour:

Ry18lmx40c