Perel EFL90 Mode D'emploi page 3

5. Operation
The LED warning flashing light with twilight sensor comes without batteries.
Please provide 1 or 2 batteries type 4R25 6V battery. The LED warning
flashlight works with 1 battery. Battery life can be extended by installing 2
batteries. The lifetime depends on the battery performance, ambient
temperature and set mode.
The battery compartment can be opened with the key provided. First
unscrew the black plastic screw, then you can open the compartment. Place
the battery in the compartment and close it back with the black plastic
screw.
The lamp has 2 control push buttons.
Push button E/A: activate or deactivate the lamp.
Push button B/D: select the mode. The mode change every time you press
the button.The lamp has 3 modes:
•
Continuous
•
Single Flashing
•
Double Flashing
Warning: The lamp only start flashing in dark environments. It is activated
via the integrated light sensor.
Mounting:
Mount the lamp via the metal bracket.
•
Unfold the bracket
•
Loosen the nut
•
Slide the bracket over a bar and screw back on.
The screw can be tightened with the included heavy plastic wrench.
6. Technical Specifications
Dimensions :
Lamps Shell size:
Lighting source:
Battery:
Installation type:
Use this device with original accessories only. Velleman nv cannot
be held responsible in the event of damage or injury resulting from
(incorrect) use of this device.
For more info concerning this product and the latest version of this
manual, please visit our website www.perel.eu.
V. 01 – 20/09/2023
EFL90
185mm*85mm*340(L*W*H)
Diameter 175mm
2PCS 5mm super bright LED
1pcs or 2pcs - 4R25 6V battery (not included)
metal brackets
3 ©Velleman Group nv