Télécharger Imprimer la page

Miele PWM 912 EH Schéma D'installation page 4

Publicité

Les langues disponibles

Les langues disponibles

en - Installation notes
4
Explanation of the safety notes and warnings on the ma-
chine
Read the operating instructions
Read all the instructions, e.g., the installation instruc-
tions
Warning, hot surfaces
Warning, voltage up to 1000 volts
Grounding
Equipotential bonding
Installation requirements
 WARNING: The washing machine must be installed by Miele
Service or by properly trained staff of an authorized dealer.
This washing machine must be installed in accordance with all rel-
evant regulations and standards. Local energy supplier regulations
must also be observed.
This washing machine must only be operated in a room that has
sufficient ventilation and which is frost-free.
The washing machine should not be installed or operated in any
area where there is a risk of explosion.
General operating conditions
This washing machine is intended only for use in a commercial envi-
ronment and must only be operated indoors.
- Ambient temperature: 32-105°F (0-40°C)
- Relative humidity: non-condensing
- Maximum height above sea level of location site: 6500 ft (2000 m)
Depending on the nature of the installation site, sound emissions and
vibration may occur.
Tip: Have the installation site inspected and seek the advice of a spe-
cialist in instances where increased noise may cause a nuisance.
Installation
This washing machine must be transported to its installation site us-
ing a suitable pallet truck. Remove the transport packaging.

Publicité

loading

Ce manuel est également adapté pour:

Pwm 912 el