Breitling SUPEROCEAN AUTOMATIC 36 Mode D'emploi page 9

PREPARATION FOR USE
WINDING – TIME-SETTING
1. Unscrew the water-resistant crown anti-clockwise. Wind the
watch through approximately 40 clockwise turns of the crown.
2. Pull the crown out to position 2. Then adjust the hour and minute.
3. Push the crown back into position 1. Turn it gently clockwise
while applying light pressure, and retighten it until you feel some
resistance. Do not force it !
12 12
SPECIAL CHARACTERISTICS
UNIDIRECTIONAL BEZEL WITH INDEX MARKERS
The bezel of your watch is marked with 12 index markers: they
are used as points of reference to mark a start time or a limit
time you wish to remember. On models with no chronograph
functions, they also provide a "minute chrono" function enabling
you to measure the elapsed time in minutes.
For safety, the bezel can only turn counterclockwise.
13