Publicité
Les langues disponibles
Les langues disponibles
English Installation Instructions
Prepare for installation.
CAUTION: To avoid the risk of electrical shock, make sure your computer and
all peripheral devices are turned off and unplugged. Disconnect all telephone
cables from any existing modems before opening the computer's cover. Touch
an unpainted metal area of your computer's case to ground yourself, which
protects your equipment from electrostatic discharge.
NOTE: USRobotics recommends uninstalling any other modems that are
installed in your system and unplugging all telephone cords connected to these
modems. Refer to your previous modem's documentation for instructions.
Write your new USRobotics modem's serial number in the box below. The serial number is
located on the white bar code sticker on the modem and on the modem's box. If you ever
need to call our Technical Support department, you will need this number and your Model
Number to receive assistance.
Model Number
Serial Number
5671
Install the Modem.
Step 1: Physically install the modem in your computer.
Turn off your computer and all peripheral devices.
Unplug your computer and remove the compu-
ter's cover. Remove the expansion slot cover at
the back of an empty PCI expansion slot. PCI slots
are usually white in color. The slot cover is on the
back of your computer and covers an opening on
your computer's case. The slot cover could be
held in place with a screw or a clip.
Insert the modem into the PCI slot. You may need
to rock the modem back and forth while pressing
down firmly to properly seat the modem in the
PCI slot.
The modem's metal bracket will cover the open-
ing on the back of the computer. If applicable,
secure the modem with the screw or clip you removed. Replace the computer's cover.
All manuals and user guides at all-guides.com
1
Publicité
