Connection - Kenwood KDC-X598 Mode D'emploi

Wiring connection
Rear/ front/ subwoofer output
Antenna terminal
To front speaker (left)
To front speaker (right)
To rear speaker (left)
To rear speaker (right)
Ignition switch
Car fuse box
Car fuse box
Black (Ground wire)
To the metallic body or chassis
of the car
Battery
Fuse (10 A)
To the optional SiriusXM Vehicle Tuner
(commercially available) ( 10)
White
White/Black
Light blue/yellow
Gray
(Steering remote
Gray/Black
control wire)
Green
Light blue/yellow
Green/Black
(Marine remote
control wire)
Purple
Purple/Black
Blue/White
(Power control wire)
Red
(Ignition wire)
Brown
Yellow
(Mute control wire)
(Battery wire)
Blue
(Antenna control
wire)
MIC (Microphone input terminal) ( 12)
If no connections are made, do not let the wire
come out from the tab.
KDC-X598
For /
To the steering wheel remote control
adapter
KMR-D558BT
For
To Kenwood Wired Marine Remote Control
unit (optional accessory)
For the latest information on marine
accessories please go to:
http://www.kenwoodusa.com/Car_
Entertainment/Marine/
To the power control terminal when using
the optional power amplifier, or to the
antenna control terminal in the vehicle.
To connect the Kenwood navigation system,
refer your navigations manual.
(Not used)
Part list for installation
(A) Faceplate
(B) Trim plate
KDC-BT558U
:
(C) Mounting sleeve
:
(D) Wiring harness
(E) Extraction key
ENGLISH | 23