Siriusxm® Radio - Kenwood KDC-X598 Mode D'emploi

SiriusXM® Radio
Preparation:
1 Connect the optional SiriusXM Vehicle Tuner (commercially
available).
Antenna
Expansion port on
the rear panel
2
Activate the subscription through www.siriusxm.com/
activatenow or call 1-866-635-2349.
The Radio ID is required to activate the SiriusXM Vehicle Tuner.
The Radio ID is located on the label of the SiriusXM Vehicle Tuner
and can also be shown on the unit's display window when you
select "Channel 0" after SiriusXM Vehicle Tuner is connected.
For users in Canada: To activate SiriusXM Canada service go to
www.xmradio.ca and click on "ACTIVATE RADIO" in the top right
corner, or call 1-877-438-9677.
Press B SRC to select SIRIUS XM to start updating.
3
Start listening
Press B SRC to select SIRIUS XM.
1
Press J BAND repeatedly to select a band.
2
3 Press .
" " lights up.
4
Turn the volume knob to select a category, then press the knob.
If "ALL CHANNELS" is selected, all the available channels will be
shown.
5
Turn the volume knob to select a channel, then press the knob.
(or)
Press S / T to search for a channel manually.
• Pressing and holding S / T changes the channel rapidly.
10
If a locked channel or a mature channel ([MATURE CH] is set to [ON]) is selected,
a pass code input screen appears. Enter the pass code to receive the channel.
• To change the tuning method for S / T: Press K SEEK.
• To store a channel of the current band: Press and hold one of the number
SiriusXM Vehicle Tuner
• To select a stored channel of the current band: Press one of the number
Direct Access Tuning (using RC-406)
(except for
1
2
3
• To cancel, press
• If no operation is done for 10 seconds after step
SiriusXM Replay™
Press and hold K SEEK (or K on RC-406).
Replay starts from the live position and "
During Replay...
•
•
•
•
Each time you press K SEEK, the tuning method switches between
"CHANNEL" (manually search for a channel) and "PRESET" (searches for a
preset channel of the selected band).
buttons (1 to 6).
buttons (1 to 6).
KMR-D558BT
)
DIRECT
Press to enter Direct Access Tuning.
Press the number buttons to enter a channel number.
Press S / T
(+)
to start searching.
DIRECT
or .
automatically canceled.
To pause or resume playback, press
RC-406).
To skip the current song backward/forward, press
S / T
(+) on RC-406).
To rewind/fast-forward, press and hold
S / T (+)
on RC-406).
To exit from Replay and go to live, press and hold
K
hold on RC-406).
2
, Direct Access Tuning is
" lights up.
6 IW ENT IW
(or press on
S / T
(or press
S / T
(or press and hold
K SEEK
(or press and