Publicité
Les langues disponibles
Les langues disponibles
Operating procedure
To activate the functions, simply tap the
buttons. If the buttons are pressed for too
long, no function is activated.
The most effective method of removing
vapours produced during cooking is to:
Switch the ventilator ON
as soon as you begin cooking.
Switch the ventilator OFF
a few minutes after you have finished
cooking.
Step 1 – 4
Light
Fan OFF
Reduce fan speed
Acoustic signal:
When a button is pressed, this is verified
by an acoustic signal.
Switching the fan ON
Press the + button.
Setting the required fan speed:
Press the + button.
The fan speed is increased by one step.
Press the – button.
The fan speed is reduced by one step.
Switching the fan OFF:
Press the
button.
Intensive settings
Fan follow-
on
Fan ON and
increase speed
Intensive settings:
Maximum power is obtained at the
intensive setting. It is only required for short
intervals.
Press repeatedly the + button until the
intensive setting LEDs start to flash.
If the intensive setting is not cancelled by
hand, the fan will automatically switch
back to step 3 after 10 minutes.
Fan follow-on: Step 1 – 4
Press the
button.
!
The fan runs for ten minutes at the
selected step whose LED flashes.
Afterwards the fan switches off
automatically.
Lighting:
The light can be switched on at any
time, even though the fan is switched off.
13
Publicité
