ETNA KIF670 Mode D'emploi page 47

SETTINGS
Setting the acoustic signal and lock parameters
You can adjust the volume of the acoustic signal, duration of acoustic alarm,
and automatic lock settings.
Activate the setting menu:
1. Switch off the appliance.
2. Touch and hold the pause key for approx. 3 seconds.
▷ The first parameter "Uo" will appear on the timer display, indicating the volume
(loudness) of acoustic signals.
3. Touch the '+' or '-' timer key to select the type of parameter:
• Uo - acoustic signal and alarm volume (loudness)
• So - alarm duration
• Lo - Automatic lock
• Po - Total maximum power
The currently set value will appear on the right cooking zone power level displays.
▷
4. Touch the '-' or '+' keys from the front right cooking zone to adjust the value.
5. Touch and hold the pause key for 2 seconds to confirm and store all parameters.
A short acoustic signal will sound.
▷
6. Touch the On/Off key to close the settings mode (if you do not wish to store the new
parameter settings).
EN 21