RCA RDW1830 Manuel D'utilisation page 34

AUTOMATIC FAULT WARNINGS AND WHAT TO DO
TROUBLE
POSSIBLE FAULT
CODE
Water inlet system failure
FF
Pressure system failure
F5
Continuous water input
F3
Inability to discharge water
F2
F8
F1
FE Faulty electronic card
F7
F9 Divisor position error
F6 Faulty heater sensor
HI High voltage failure
11. PRACTICAL INFORMATION
1. When the machine isn't in operation:
• Disconnect the plug and close the tap.
• Leave the door slightly open to prevent odour formation.
2. Select the dry option to remove water droplets.
3. Place dishes in the machine properly to achieve the best energy consumption, washing
and drying performance. Please see the program and consumption table for more
information.
4. Rinse dirty dishes before placing them in the dishwasher.
5. Only use the Rinse program when necessary.
6. Do not place the machine near a refrigerator because it will reach high temperatures.
7. If the machine is located in an area that is at risk of freezing, close the tap, disconnect
the inlet hose from the tap and drain the water inside the hose and the machine
completely. penses outside the metropolitan region.
34
Make sure the water inlet tap is open and water is flowing.
Separate the inlet hose from the tap and clean the filter of
Heater error
Overflow
Overheating
WHAT TO DO
the hose.
Contact for service if the error continues.
Contact for service.
Close the tap and contact for service.
Water discharge hose and filters may be clogged.
Cancel the program.
If the error continues, contact for service.
Contact for service.
Unplug the machine and close the tap.
Contact for service.
Contact for service.
Contact for service.
Contact for service.
Contact for service.
Contact for service.