Publicité
Les langues disponibles
Les langues disponibles
NOTE: The program duration may
change according to the amount of dishes,
the water temperature, the ambient
temperature and selected additional
functions.
NOTE: The energy-usage label is based
on the "Regular" program. This program is
the most efficient in terms of its combined
energy and water consumption at cleaning
normally soiled dishes.
•
Only use powder detergent for short
programmes.
•
Short programmes do not include
drying.
•
To assist drying, we recommend
slightly opening the door after a cycle is
complete.
Water Temperature
Hot water is needed for best dishwashing
and drying results. Water entering
dishwasher should be at least 120°F (49°C)
to give satisfactory results.
To check water temperature entering
dishwasher:
• Turn on hot water faucet nearest
dishwasher for several minutes to clear
cool water from pipes.
• Hold a candy or meat thermometer in
stream of water to check the temperature.
• If temperature is below 120°F (49°C),
have a qualified person raise the hot water
heater thermostat setting.
26
8 OPERATING THE PRODUCT
Keys
On/Off Key
This key is used as On/Off. It is used to
turn on or turn off the machine. The On/
Off led remains lit as long as the machine
is on. Machine will turn on with Regular
program and the number and the duration
of the regular program will appear on the
display. Each of program number and the
duration will sequentially represent for 2
seconds on the display. In Off position,
the display will turn off.
Program Selection Key
It is used to select the washing program
you determined from the programs table.
Start/Pause Key
Press start/pause key to start the
selected program. When program is
started, display shows the remaining time
for that specific program.
The cancel key is activated when Start/
Pause Key is held down for 3 seconds.
Extra Key
This key is used to select auxiliary
functions. Sanitize, Extra Rinse, Extra Dry
functions can be selected with this key.
Half Load / Hi-Temp Key
This key is used to select Half Load and
Hi- Temp functions.
Delay Timer Key
It should be pressed to make the time
delay settings.
Preparing The Machine
1. Open the door of the dishwash .
2. Place the dishes in accordance witht
instructions in the user manual.
3. Make sure that the upper and low
impellers rotate freely.
4. Put adequate amount of detergent in
Publicité
