RCA RDW1830 Manuel D'utilisation page 27

the detergent dispenser.
5.. Check if the Salt an Rinse Aid indicators
light and add salt and/or rinse aid if needed.
Program Selection
1.Press the On/Off key to turn on yo
machine.
2.Refer the "Program Table" to determine a
washing program suitable of your dishes.
3.Press program selection key until t number
of the program you selected appears on the
display.
Auxiliary Functions
Washing programs of your dishwasher are
designed to obtain the best cleaning effect,
considering the type of the soil, soiling
degree and properties of the dishes to be
washed. Auxiliary functions are provided in
order to enable you to save time, water and
energy and to perform a more comfortable
washing with conditions specific to you.
i. Auxiliary functions may cause changes
in the program duration.
ii. Auxiliary functions are not suitable for all
washing programs. Indicator of the auxiliary
function that is not compatible with the
program will not be active. Besides, the
machine gives aural warning via buzzer. The
compatibility of the programs and options is
shown on the "PROGRAMS AND OPTIONS
TABLE" section.
To add auxiliary function to the program:
1.Select the desired washing program
pressing the Program Selection key.
2.In the selected washing progra
if auxiliary function is selected, the
corresponding function led will be on. If the
Half Load or Options key is pressed again,
the corresponding led of another auxiliary
function will be on. To select the Hi-Temp
function, press Options key for 3 seconds.
3The selection of the auxiliary function will
be cancelled when you press the Half Load
or Options button until the selected option
led becomes off.
Sanitize Function
Sanitize function raises the water
temperature in the final rinse.temperature in
the final rinse.
i.At the end of a successful sanitization, "--" is
displayed on the display and End of program
indicator will be active.
ii.vailable programs and options are indicated
on program Table and Options Table charts
Rinse Function
If the rinse option is selected, an extra rinse
will be added to the selected program.
Extra Dry Function
The machine changes the water temperature
from the value described for each different
program and the extra dry is performed.
Half Load Function
It is used to operate the machine without
loading it completely.
1.Load your dishes in the machine as you
like.
2.Turn the machine on with On/Off key.
3.Select the desired program and press the
Half Load key. The Half Load indicator will
light on the display.
4.Press Start/Pause key to start t selected
program and close the door of the machine.
5.With the Half Load function you can sa
power while using the lower and/or upper
baskets of the machine.
Hi-Temp Function
Press the Half Load / Hi-Temp key for twice
to activate the Hi-Temp option. Use this
specific option when using combined
detergents that contain salt and rinse aid.
When this option is selected, both the water
temperature and the washing time are
increased.
27