Publicité
Les langues disponibles
Les langues disponibles
Rinse - aid Usage
Rinse-aid makes dishes sparkle and helps
them to dry without spotting. Rinse-aid is
required for stain-free utensils and clear
glasses.
(!)Use only rinse-aid for domestic
dishwashers.
(!)Filling the rinse aid reservoir with
detergent will damage the reservoir. Only
pour rinse aid formulated for residential
dishwashers into the reservoir.
NOTE: When the Rinse Aid indicator
lights up, the rinse aid reservoir contains
sufficient rinse aid for 2 - 3 programs only.
When using "Tab" detergents rinse aid is
not needed.
5.9 Filling The Rinse-aid and Setting
1. To fill the rinse aid compartment, open
the rinse-aid compartment cap (Fig.A)
2. Fill the compartment with rinse aid to
the MAX level and then close the
cap.Be careful not to overfill the rinse
aid compartment and wipe up any
spills.
3. Close the cap until it click. Otherwise
water can enter the rinse aid reservoir
during a program.
18
In order to change the rinse aid level,
follow the below steps before turning
on the machine
1. Press the Program button and hold
it down when the machine is off
position.
2. Turn on the machine by pressing
On/Off button and continue to press
Program but-ton until "rA"
disappears from the display. Rinse
aid setting follows water hardness
setting.
3. The machine will display the last
setting.
4. Set the level by pressing the
Program button.
5. Turn off the machine to save the
setting.
The factory setting is "4".
NOTE: If the dishes are not drying
properly or are spotted, increase the
level If blue stains form on your dishes,
decrease the level.
Level
Brightener Dose
1
Rinse - aid not
dispensed
2
1 dose is
dispensed
3
2 doses are
dispensed
4
3 doses are
dispensed
5
4 doses are
dispensed
Indicator
r1 is shown on the
display.
r2 is shown on the
display
r3 is shown on the
display.
r4 is shown on the
display.
r5 is shown on the
display.
Publicité
