Télécharger Imprimer la page

CyberPower PR1000ELCDRTXL2U Manuel D'utilisation page 7

Publicité

Les langues disponibles

Les langues disponibles

BATTERY REPLACMENT PROCEDURE:
1
1. Remove the front panel on the
right side.
3. Remove the one retaining
screws of the cable connectors.
5. Remove the three retaining
screws.
REMINDER! The used batteries are hazardous wastes and must be disposed through recycling. Most retailers
that sell lead-acid batteries collect used batteries for recycling, as required by the local regulations.
Copyright © 2009 CyberPower Systems, Inc.
BATTERY REPLACEMEN (continued)
2. Remove the two retaining screws
of the cable protection cover then
remove the cover.
4. Disconnect the black wire and red
wire from the battery.
6. Put the new battery packs back into the
compartment. Tighten up the screws and
replace the cable protection cover and the
front panel. Recharge the unit for 8 hours
to ensure the UPS performs expected
runtime.
6

Publicité

loading

Ce manuel est également adapté pour:

Pr1500elcdrtxl2uPr2200elcdrtxl2u