Publicité
Les langues disponibles
Les langues disponibles
PR1000ELCDRTXL2U/PR1500ELCDRTXL2U
PR2200ELCDRTXL2U
5. Battery Backup, Surge Protected and AVR protected Outlets
This unit provides a total of ten outlets with battery backup and surge protection. They ensure that connected
equipment will keep an uninterrupted operation over a period of time, during a power failure.
Critical /Non-critical
It is possible to program the unit in a way so that the outle block marked as "non-Critical", (6 ports), will stop the
provision of power to connected equipment after a certain period of time, thus making more runtime available
for the equipment connected on the outlets marked as "Critical", (4 ports). In other words, the user can
establish runtime priority for certain connected equipment, maximizing its "availability" during a prolonged
power outage. This type of control takes place with the use of the provided PowerPanel
6. AC Inlet
Connect the AC Power cord to a properly wired and grounded outlet.
7. Output Circuit Breaker
The circuit breaker serves to provide output overload and fault protection.
8. Input Circuit Breaker
The circuit breaker serves to provide input overload and fault protection.
9. USB port to PC
This is a connectivity port allowing communication and control among the UPS and the connected computer.
You should install on your computer the PowerPanel
system you are using.
10. Surge Protected Communication Ports - RJ11/RJ45
These ports are being used to protect from various surge-conditions the standard RJ-45/RJ-11 based, (ADSL,
LAN, Phone/Modem-Lines), cabling systems.
11. Serial Port I (Primary)
Serial port I allow for bi-directional communication among the UPS and the computer. The UPS can control the
computer's shutdown in case of an emergency, and at the same time, the computer can monitor the UPS and
alter its various programmable parameters.
Copyright © 2009 CyberPower Systems, Inc.
BASIC OPERATION (continued)
7
5
15
7
5
15
®
Business Edition software appropriate to the operating
13
9
8
14
6
Expansion Port
Provides SNMP Card Communication
AC INPUT
EPO
Serial Port I
Serial Port II
IN
OUT
(PRIMARY)
16
11
12
10
9
8
6
13
14
Expansion Port
Provides SNMP Card Communication
AC INPUT
EPO
Serial Port I
Serial Port II
IN
OUT
(PRIMARY)
16
11
12
10
®
Business Edition S/W.
4
Publicité
