Publicité
Les langues disponibles
Les langues disponibles
1
2
3
4
5
6
7
1
Product overview
1
Speed control
2
Lock on button
3
On / Off switch
4
Work light
13
5
Blade clamp
6
Finger protection
7
Saw blade
8
Foot plate
9
Blade guide roller
12
10
Oscillation control
11
Vacuum adaptor
12
Power cord
13
Rubber grip
Using the tool
11
1. Set a suitable inclination, speed, and os-
10
cillation as described below and on next
page.
2. Connect the tool to a vacuum cleaner,
9
suitable for the expectable dusts.
3. Press and release the on / off switch 3,
8
before connecting the power plug to a
suitable socket (see "Technical Data").
4. Make sure your workpiece can not slip.
Place the tool on the workpiece so that
the footplate
8
is in contact.
5. To switch on the tool, press and hold
the on / off switch 3. To lock the on / off
Adjustments
SPEED ADJUSTMENT
1
Use the speed control
speed to the material and its thickness:
1 - 2 only for start-up chamfer
3 - 4 metal
3 - 5 plastic
5 - 6 timber
Intended use
The tool is intended for wood, plastic and met-
al cutting applications. The tool is not intended
for commercial use.
Any other use or modification to the tool is
considered as improper use and could cause
considerable dangers.
switch
3
in position, press the lock on
2
button
while the on / off switch
pressed.
6. Start working, while holding the tool firm-
ly with both hands. Let the tool come to
full speed and slowly cut the workpiece.
7.
To switch off the tool, press and release
the on / off switch 3.
Warning! The saw blade becomes
hot during use. Be careful not to
touch it. Burn hazard.
1
to adjust the
Start at low speed for a good control,
and slowly increase speed. Do not
use the tool at very low speed for a
longer time.
3
is
EN
121
Publicité
