Publicité
Les langues disponibles
Les langues disponibles
off. The saw blade can be damaged, break
or cause kickback.
h) Clamp material well. Do not support the
workpiece with your hand or foot. Do
not touch objects or the floor with the
the saw running. Danger of kickback.
i) When working with the machine,
always hold it firmly with both hands
and provide for a secure stance. The
power tool is guided more secure with both
hands.
j) Use clamps or another practical way to
secure and support the workpiece to a
stable platform. Holding the workpiece
by hand or against your body leaves it
unstable and may lead to loss of con-
trol.
k) Always wait until the machine has
come to a complete stop before placing
it down. The tool insert can jam and lead
to loss of control over the power tool.
118
EN
Noise & Vibration
The declared vibration total value and the de-
clared noise emission values have been meas-
ured in accordance with a standard test meth-
od (EN 62841-1 & EN 62841-2-11) and may
be used for comparing one tool with another.
The declared vibration total value may also be
used in a preliminary assessment of exposure.
Caution! The vibration and noise emis-
sion during actual use of the power tool
can differ from the declared total value depend-
ing on the ways in which the tool is used, in par-
ticular, what kind of work piece is machined.
It is necessary to identify safety measures to
protect the operator that are based on an es-
timation of exposure in the actual conditions
of use (taking account of all parts of the op-
erating cycle such as the times when the tool
is switched off and when it is running idle in
addition to the trigger time)
Try to minimize the impact of vibration and
noise. Exemplary measures to reduce vibra-
tion exposure include wearing gloves while
using the tool, limiting working time, and using
accessories in good condition.
Residual risks
Even if you are operating this product in
accordance with all the safety require-
ments, potential risks of injury and dam-
age remain. The following dangers can
arise in connection with the structure and
design of this product:
1. Injuries and damage to property due to
broken application tools.
2. Danger of injury and property damage
caused by flying objects.
EN
119
Publicité
