LD Systems STINGER SUB G2 Série Manuel D'utilisation page 9

1
LINE INPUT
Balanced line input XLR / 6,3mm jack (combo).
2 SUB LEVEL
Subwoofer volume.
SUB PHASE
3
Inverts the phase of the subwoofer (0° / 180°) if necessary.
SUB FREQ
4
Adjusts the upper cut-off frequency of the subwoofer (80 - 200 Hz Low-Pass).
LINE DIRECT OUTPUT
5
Balanced XLR line output.
POWER LED
6
SIGNAL LED
7
Lights up when the unit receives an audio signal.
8 LIMIT LED
Lights up when the limiter is active. The limiter function protects your subwoofer from damage. If the limiter
LED lights up permanently, reduce volume.
POWER
9
Switches power on/off.
MAINS SOCKET (VOLEX POWER PLUG)
10
with built-in fuse holder. AC connection via IEC connector (220 - 240V AC). A power cord with a lockable
Volex connector is supplied with this unit. IMPORTANT: Replace fuse only by fuse of same type and rating! If
fuse blows repeatedly please contact authorized service center!
9