Publicité
Les langues disponibles
Les langues disponibles
Features
1. Control panel
a. Pre-Filter
b. HEPA reset
c. Ionizer
d. UV
e. Night light
2. Display
j) Night light mode
k) Pre-filter reset
l) HEPA Filter reset reminder
m) Auto mode
n) Fan speed
Display/
Control
There is an illuminated light ring around the display to indicate the current air quality. When the value of PM2.5 is less than 35, the light ring is illuminated in blue, indicating
that the air quality is very good. When the value of PM2.5 ranges between 36 and 115, the light ring is illuminated in purple, indicating that the air quality is good. When the
value of PM2.5 is more than 115, the light ring is illuminated in red, indicating that the air quality is bad.
PM2.5
INDICATOR
There are five speed settings Speed 1, Speed 2, Speed 3, Speed 4 and AUTO for selection.
Press the "SPEED/AUTO" button on the control panel to select desired speed and the corresponding icon will be illuminated on the dial to indicate selected speed.
SPEED/AUTO
There are four time settings of 2H, 4H, 6H and 8H for selection.
Press the "TIMER" button on the control panel to to select desired time and the corresponding icon will be illuminated on the dial to indicate selected time.
TIMER
The appliance will run under "SLEEP" mode if the "SLEEP" mode is activated so that the user can have a quite sleeping environment.
Press the "SLEEP/LOCK" button on the control panel to activate "SLEEP" mode and the corresponding "SLEEP" mode icon will be illuminated on the dial.
All the controls are invalid if the "CHILD LOCK" function is activated. Hold and press the "SLEEP/LOCK" button on the control panel for 3 seconds to activate "CHILD LOCK"
SLEEP/LOCK
condition and the corresponding "CHILD LOCK" mode icon will be illuminated on the dial.
The display dial and the light ring will turn off if the "NIGHT LIGHT" mode is activated, and the middle part of the display will show "-".
Press the "NIGHT LIGHT" button on the control panel to activate "NIGHT LIGHT" mode.
NIGHT LIGHT
This appliance has an independent ionizer feature which, when turned on, release negative ions into outgoing filtered air to help the air purification process, and the
corresponding "IONIZER" icon will be illuminated on the dial.
IONIZER
This appliance is equipped with a UV lamp (UV-C emitter), so that it has a strong bactericidal effect and the structure of microorganisms can be destroyed by the high
energy of the ultraviolet spectrum. Press the "UV" button on the control panel to turn on the UV lamp and the corresponding icon of "UV" will illuminate.
The "UV" icon will display solid blue color to remind the user to replace the UV lamp, if the appliance has been cumulatively operated for 7300 hours.
UV LAMP
The "FILTER RESET" icon will illuminate in red to remind the user to replace the HEPA filter if the appliance has been cumulatively operated for 2160 hours.
After replacing the filter, hold and press the "FILTER RESET" button for 3 seconds to reset and then, "FILTER RESET" icon will disappear from the display dial.
FILTER RESET
REMINDER
The "PRE-FILTER" icon will illuminate in red to remind the user to replace the nylon filter if the appliance has been cumulatively operated for 360 hours.
After replacing the filter, hold and press the "PRE-FILTER" button for 3 seconds to reset and then, "PRE-FILTER" icon will disappear from the display dial.
PRE-FILTER
3. Light ring ( Red, Purple, Blue)
6. HEPA filter
f. Sleep / Lock
g. Timer
h. Speed / Auto
a
i. On / Off
j
k
l
m
n
4. Filtered air outlet
7. Rear Cover
(Original instructions)
b
c
d
e
Operation
ENGLISH
g
f
o
o) Ionizer
p
p) UV
q
q) PM2.5
r
r) LCD Screen
s
s) Child lock
t) Timer
t
5. Rear Sensor
8. Air Inlet
i
h
5
Publicité
