Publicité
Les langues disponibles
Les langues disponibles
Programming tracks and files
Using the remote control, you can programme tracks from an audio CD or files to play in the order
you desire. The following number of spaces in memory is available to you for this:
Audio-CD:
Procedure with audio CD
1. The "CD" source must be in Stop mode, otherwise "STOP FIRST" will show in the display.
2. Press the
button to start the programming mode.
PRG
3. The display will now show "01 PR01" where "01" will be flashing. The first block of numbers
shows the current track, the second block of numbers shows the current storage space.
4. Using only the
or
space.
5. Press the
button to confirm the operation.
PRG
6. Afterwards the next storage space will be displayed. Repeat steps 4 and 5 until your selection is com-
pleted or the complete number of memory spaces in occupied. In this case, "Full" will be displayed.
7. With the
button, you can start playback of the programmed tracks. During playback
the number of the track and that of the programme space will be alternately displayed.
8. Pressing the
button twice deletes the programming.
Procedure with audio files
1. The "USB" source must be in Stop mode, otherwise "STOP FIRST" will show in the display.
2. Press the
button to start the programming mode.
PRG
3. The display will now show "01 PR01" where "01" will be flashing. The first block of numbers
shows the current track, the second block of numbers shows the current storage space.
4. Using the
or
Fold+
been selected, the display changes to
for the current track.
5. Using only the
or
6. Press the
button to confirm the operation.
PRG
7. Afterwards the next storage space will be displayed. Repeat steps 4 and 6 until your selection is com-
pleted or the complete number of memory spaces in occupied. In this case, "Full" will be displayed.
8. With the
button, you can start playback of the programmed tracks.
9. Pressing the
button twice deletes the programming.
• If the
button is pressed during playback the process is interrupted. Turning off
the device deletes any programme which is present.
20 memory spaces
button, select the track which you want to drop into the current storage
button, select a folder or retain the current folder. When a folder has
Fold-
"Fxx XXX"
button, select the track which you want to drop into the current storage space.
Files: 99 memory spaces
. Here, "Fxx" stands for the current folder and "XXX"
11
Publicité
