BraunAbility Carolift 40 Instructions D'utilisation page 21

Troubleshooting
Carolift is not activated when you press
the rocker switch ....................................................
Carolift is unusually sluggish in operation .
- The lifting strap has become tangled and tripped the fuse. Loosen the motor and
ensure the lifting strap is evenly rolled onto the spool. Replace the fuse.
- An end position is reached. Activate reverse operation.
- The plug of the electrical outlet has come loose (applies only when installing this
type). Re-insert the plug.
- The vehicle battery is discharged. Charge the battery.
- The fuse has tripped due to a short circuit. Contact the workshop.
The vehicle battery is discharged. Charge the battery.
In case of emergency, try to start the vehicle and let the engine run while the crane is
operated.
21
Carolift 40
EN