Publicité
Les langues disponibles
Les langues disponibles
You must insert the accessories in the slots of the clamps and fix to the guides by screwing and unscrewing the handle.
As for the blood-sample taking armrests, the thigh/heel/feet supports and the metal tray, once they are properly in-
stalled it is possible to turn the handles without loosening the clamps; simply pull the handles and place them so that
they do not bother while using the chair.
6.7. Heating
The heating system of the mattress can be regulated by the "HEAT" button panel, which is
on the backrest.
SWITCH ON: Button 1 (red led ON): activation of the LOWEST temperature (40 ° C)
Button 1 + Button 2: activation of the HIGHEST temperature (47 ° C)
SWITCH OFF: Button 1 + Button 2 (red led OFF)
WARNING! Do not place ANY object on the seat and / or back when the heating is on to avoid excessi-
ve overheating of the affected area.
WARNING! Do not cover the product with more than one mattress cover, make sure you use quality products.
WARNING! ALWAYS TURN OFF THE HEATING WHEN THE CHAIR IS NOT IN USE.
6.8. Wheels
The 4 wheels with brake (Ø 50mm) are installed in place of the feet.
WARNING! ALWAYS block the brake of each wheel before the
client sit on the chair.
6.9. Chair Rotation
The upper part of the chair can rotate to 180° (90° left + 90° right). To rotate
the chair, turn the handle situated under the basement, fix the chair into the
required position and block the rotation by tightening the handle clockwise.
7.1. Operator
The chair is controlled by an operator through the foot pedal control; the operator must position themselves so as to
have complete view of the controlled parts and of the patient.
7. INSTRUCTION FOR USE
9
Publicité
