LEMI 3 Notice D'utilisation page 14

11. SPARE PARTS
All the spare parts must be requested to Brusaferri & C. that will supply them directly or will give you indications
on the place where they can be found. Please note that any extraordinary maintenance must be performed by
personnel of Brusaferri & C. or authorized by it.
All the spare parts must be requested to Brusaferri & C. that will supply them directly or will
give you indications on the place where they can be found. Please note that any extraordinary
maintenance must be performed by personnel of Brusaferri & C. or authorized by it.
12. DISMANTLE
If the chair becomes inoperative or is not to be used for an extended period of time, it is recom-
mended to remove it from service and remove the plug from the socket. All materials used to ma-
nufacture the chair are not toxic or hazardous to the health of operators, so they can be handled
without special precautions. In case of disable of the chair you should perform a separation of different
materials for subsequent reuse or differentiated elimination. All electrical and electronic products should be
separately disposed, using specific collection facilities appointed by the Government or the Local Authorities.
13. DISPOSAL OF OBSOLETE EQUIPMENT
The correct disposal of the obsolete equipment will help to prevent potential negative effects on
human health and the environment. For information, contact your Local Council or the Waste
Disposal Service.
- The dismantling of the chair at the end of its functional life must be done by qualified
personnel trained about the correct way of handling – and if necessary of dismantling
the chair.
- Use only suitable equipment and lift appliances in accordance with the National
Regulations and Legislative Law in force.
- Having to dismantle the chair or to move it in another place, please contact the manu
facturer Brusaferri & C – Italy.
14