LEMI 3 Notice D'utilisation page 10

WARNING! During the functioning of the chair the operator should always remain in the vicinity
of the controls; it is forbidden to leave the chair unattended during its operation.
Operators should pay attention to avoid creating potentially dangerous situations for their own
or other's safety.
All people working on the chair must be properly trained on the correct methods of work and
informed about its proper functioning. They also need to be aware of the parts of this documen-
tation relevant to their work.
Operators must not wear clothes with drapes that could get caught by moving part of the chair.
Proper clothing is made of close-fitting garments, especially on the upper limbs.
Nor the operator and the patient must wear rings, necklaces, bracelets, wristwatches, ties or
other objects that could get caught by moving parts of the machinery.
In case of allergy, cover the chair with a sheet.
The operator must stand in order to always control all the adjusted parts and also the patient.
7.2. Use of mattress
IMPORTANT! It is mandatory to cover and protect the mattress with disposable paper covers or washable
sponge covers (better if sponge + PVC) for its correct and hygienic preservation. The upholstery could be
damaged by the normal heat of the skin or by a prolonged use of essential oils or cosmetic product. Any
replacement caused by damages due to misuse won't be considered under warranty.
7.3. Controls
The chair can be controlled by a foot pedal control with cable. All the controls work only when activated: the chair move-
ment will stop as soon as the operator releases the pedal.
The operator must only use the controls to move the chair.
1
7.4. Head adjustment (LEMI 3 BI-ZAK)
To adjust / remove the head, turn the head knob
10
2
FOOT PEDAL CONTROL WITH CABLE
Pedal 1 = Chair UP
Pedal 2 = Chair DOWN
Head
knob