Bosch NIT8060SUC Manuel D'utilisation page 18

en-us Operation
6.12 Wipe protection
With this function you can avoid changing the settings
while cleaning the control panel during cooking.
This function does not lock the main switch. You can turn
the cooktop off at any time.
Activating wipe protection
Touch panel lock.
▶
a The indicator above panel lock lights up.
a The control panel is locked for 35 seconds.
a After 30 seconds a beep indicates that the wipe protec-
tion is about to turn off.
Deactivating wipe protection
Touch panel lock.
▶
a The indicator above panel lock goes out.
6.13 Basic settings
You can configure your appliance to meet your needs.
Basic settings overview
Here you can find an overview of the basic settings and
the preset factory settings.
Display Function
Panel lock
– Manual 1
– Automatic
– Function deactivated
Signal tones
– Confirmation signal and error signal are
off. The main switch signal remains on.
– Only error signal is on.
– Only confirmation signal is on.
– Confirmation signal and error signal are
on. 1
Display energy consumption
– Deactivated.
– Activated.
Duration of timer end signal
– 10 seconds
– 30 seconds
– 1 minute
⁠ ⁠ Power management function. Limiting the to-
tal power of the cooktop. The available set-
tings depend on the maximum power of the
cooktop.
– Deactivated
– 1.000 W minimum power
– 1.500 W
...
– 3.000 W recommended for 13 A
. – 3.500 W recommended for 16 A
– 4.000 W
. – 4.500 W recommended for 20 A
...
or . – Maximum power of the cooktop
1 Factory setting (may vary according to model)
2 The cooktop's maximum power output is shown on the
rating plate
18
1
1
1 2
,
Display Function
Time for setting a cooking zone after selec-
tion
– Unlimited: The last selected cooking zone
remains selected. You can adjust the settings
without having to select it again.
– Limited: You can adjust the settings for
the selected cooking zone within 10 seconds.
After 10 seconds you have to select the
cooking zone again.
Results for suitability test for cookware
– Not suitable.
– Not ideal.
–Suitable.
Restore factory settings
– Off
– Restore appliance to factory settings
1 Factory setting (may vary according to model)
2 The cooktop's maximum power output is shown on the
rating plate
Changing the basic settings
Requirement: The cooktop is turned off.
Turn on the cooktop.
1.
Within the next 10 seconds, press kitchen timer for
2.
about 4 seconds.
The first four displays provide the product information.
To call up the individual displays, touch the control
panel.
Product information
Customer Support index (CI)
Production number
Production number 1
Production number 2
Press kitchen timer to access the basic settings.
3.
a In the left display
a In the timer display
Press kitchen timer repeatedly until the desired setting
4.
2
lights up in the left display.
Set the desired option in the settings area.
5.
1
Display
⁠ .
and flash alternately.
lights up.