FLAEM Neb-Aid P0603EM F400 Mode D'emploi page 18

NEBULIZER TECHNICAL SPECIFICATIONS
Model: RF7-1
RF7 Dual Speed Nebuliser
Minimum drug capacity:
Maximum drug capacity:
TECHNICAL SPECIFICATIONS OF DEVICE
Model: P0603EM F400 combined RF7-1
Operating pressure (with neb.):
Release:
(1)
MMAD:
(2)
Respirable fraction < 5 μm (FPF)
(2)
(1) Data collected according to Flaem's internal procedure.
(2) In vitro characterisation performed by TÜV Rheinland Italia S.r.l. in cooperation with the University of Parma. More
details are available on request.
APPLIED PARTS
Type BF applied parts are:
Weight:
ENVIRONMENTAL CONDITIONS
Operating conditions:
Ambient temperature
Relative air humidity
Atmospheric pressure
Storage and transport conditions:
Ambient temperature
Relative air humidity
Atmospheric pressure
DURATION
Model: P0603EM F400
(Compressor unit)
Model: RF7-1
(Nebuliser and accessories)
2 ml
8 ml
0.65 bar.
0.55 ml/min approx.
:
patient accessories (B3, B4, B5, B6)
1.300 kg
Between +10°C and +40°C
Between 10% and 95%
Between 69 KPa and 106 KPa
Between -25°C and +70°C
Between 10% and 95%
Between 69 KPa and 106 KPa
Service life 400 hours.
The expected average life is 1 year, however it is advisable to replace the
nebuliser every 6 months during intensive use (or sooner if the nebuliser
is clogged) to ensure maximum therapeutic effectiveness.
18
Speed selector B2.4
in pos Max
0.25 ml/min approx.
4.58 μm
54.4%
in pos Min
3.78 μm
63%
B
C
OP
Be
sec
on
(so
mu
wi
1.
2.
3.
4.
5.
6.
AT
de
pre