VOLTCRAFT PR-80 Mode D'emploi page 31

11.5 MAX / MIN / AVG
In this mode the display shows the „MIN" (minimum), „MAX" (maximum), or „AVG"
(average) values measured.
Press the MAX/MIN/AVG button to enable MAX/MIN feature.
Press the MAX MIN button multiple times to switch between these modes: MAX
→ MIN → AVG.
The display shows „MAX", „MIN" or „AVG", to indicate which mode is currently
activated.
To exit MAX/MIN/AVG mode, press the MAX/MIN button for 2 seconds to go back
to normal operation. In MAX/MIN/AVG mode, the automatic shut-off function is de-
activated.
11.6 Hold data
Press the HOLD button briefly to freeze the measurement value displayed. The
„HOLD" symbol appears at the top left of the display.
Press the HOLD button again to go back to normal operation.
31