Publicité
Les langues disponibles
Les langues disponibles
To deactivate automatic shut-off:
Required conditions:
The measuring instrument is switched on.
1. The hold function is activated.
2. Press the
Note:
If the automatic switch-off function is deactivated, the
ger displayed.
3. The automatic shut-off function will be reactivated after the device has been
switched off.
11.3 Zero setting and offset
Before use, with no fittings attached to the measuring device, press the ZERO but-
ton for longer than 2 seconds to zero set the meter.
0000 will appear in the display from right to left, the disappear rapidly.
11.4 Display hold function
Important:
– The display hold function freezes the display.
– The display hold function should be switched off before taking measure-
ments.
Press the HOLD button to switch the display hold function on or off.
When the display hold function is switched on, the „HOLD" symbol will be dis-
played.
30
button briefly to switch the automatic shut-off function on or off.
symbol is no lon-
BN 2620274
Publicité
