Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION / CONNECTION
Installing the unit (in-dash mounting)
Hook on the top side
Orientate the trim
plate as illustrated
before fitting.
When installing without the mounting sleeve
1
Remove the mounting sleeve and
trim plate from the unit.
2
Align the holes in the unit (on both
sides) with the vehicle mounting
bracket and secure the unit with
screws (commercially available).
Use only the specified screws. Using wrong screws
might damage the unit.
Do the required wiring.
( 28, 29)
Dashboard of
your car
Bend the appropriate tabs to hold the
mounting sleeve firmly in place.
How to remove the unit
1
Detach the faceplate.
2
Fit the catch pin on the extraction keys into the holes on both
sides of the trim plate, then pull it out.
3
Insert the extraction keys deeply into the slots on each side,
then follow the arrows as shown below.
Part list for installation
(A) Faceplate
(B) Trim plate
(D) Wiring harness
(C) Mounting sleeve
(E) Extraction key
ENGLISH
27
Publicité
