Publicité
Les langues disponibles
Les langues disponibles
TROUBLESHOOTING
Symptom
Remedy
"STATION NOT
Broadcast from the station is over.
AVAILABLE"
"STATION NOT SELECTED"
No station is selected.
"STREAM ERROR"
Broadcast data is interrupted.
"THUMB FAILED"
Registration of Thumbs Up/Down has failed.
"TIMED OUT"
The request has resulted in time-out.
"CH LOCKED LOCK CODE?"
The selected channel is locked. Enter the correct pass code
to unlock. ( 13)
"CHAN UNSUB"
The selected channel is unsubscribed. Call 1-866-635-2349
in U.S.A. or 1-877-438-9677 in Canada to subscribe.
( 11)
"CH UNAVAIL"
The selected channel is unavailable. Visit
www.siriusxm.com for more information about the
SiriusXM channel lineup.
"CHECK ANTENNA"
Check the antenna and its connection are in good condition.
"CHECK TUNER"
Make sure the SiriusXM Vehicle Tuner is connected to
the unit.
"NO SIGNAL"
Make sure the antenna is mounted outside the vehicle.
"SUBSCRIPTION UPDATED
Your subscription is updated. Press the volume knob to
– PRESS ENTER TO
continue.
CONTINUE."
"CODE ERROR"
Make sure you have entered the correct pass code. ( 13)
"NO CONTENT"
There is insufficient content to start TuneScan.
"SCAN CANCEL"
TuneScan has been aborted.
24
Symptom
Remedy
• Search from the Bluetooth device again.
No Bluetooth device is
• Reset the unit. ( 3)
detected.
• Make sure you have entered the same PIN code to both
Bluetooth pairing cannot
be made.
the unit and Bluetooth device.
• Delete pairing information from both the unit and the
Bluetooth device, then perform pairing again. ( 14)
• Adjust the microphone unit's position. ( 14)
Echo or noise is heard
• Check the [ECHO CANCEL] setting. ( 15)
during a phone
conversation.
• Reduce the distance between the unit and the Bluetooth
Phone sound quality
is poor.
device.
• Move the car to a place where you can get a better
signal reception.
• Use voice calling method in a more quiet environment.
Voice calling method is
• Reduce the distance from the microphone when you
not successful.
speak the name.
• Make sure the same voice as the registered voice tag is
used.
• Reduce the distance between the unit and the Bluetooth
Sound is being
interrupted or skipped
audio player.
• Turn off, then turn on the unit and try to connect again.
during playback of a
• Other Bluetooth devices might be trying to connect to
Bluetooth audio player.
the unit.
• Check whether the connected Bluetooth audio player
The connected Bluetooth
audio player cannot be
supports Audio/Video Remote Control Profile (AVRCP).
controlled.
(Refer to the instructions of your audio player.)
• Disconnect and connect the Bluetooth player again.
Publicité
