Publicité
Les langues disponibles
Les langues disponibles
BLUETOOTH®
Other settings
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to make a selection (see the following table), then press the knob.
3
Repeat step
2
until the desired item is selected/activated or follow the instructions stated
on the selected item.
4
Press and hold
to exit.
To return to the previous setting item, press
BT MODE
PHONE SELECT
Selects the phone or audio device to connect or disconnect.
"
*
" appears in front of the device name when connected.
• You can only connect another Bluetooth device by disconnecting the connected Bluetooth device
AUDIO SELECT
first.
"
*
" disappears when disconnected.
1 Turn the volume knob to select a device to delete, then press the knob.
DEVICE DELETE
2 Turn the volume knob to select [YES] or [NO], then press the knob.
PIN CODE EDIT
Changes the PIN code (up to 6 digits).
(0000)
1 Turn the volume knob to select a number.
2 Press S / T to move the entry position.
Repeat steps
3 Press the volume knob to confirm.
RECONNECT
ON: The unit automatically reconnect when the last connected Bluetooth device is within range. ;
OFF: Cancels.
AUTO PAIRING
ON: The unit automatically pair supported Bluetooth device (iPhone/ iPod touch/ Android device)
when it is connected through USB input terminal. Depending on the operating system of the
connected device, this function may not work. ; OFF: Cancels.
INITIALIZE
YES: Initializes all the Bluetooth settings (including stored pairing, phonebook, and etc.). ;
NO: Cancels.
18
.
1
2
and
until you finish entering the PIN code.
Bluetooth test mode
You can check the connectivity of the supported
profile between the Bluetooth device and the
unit.
• Make sure there is no Bluetooth device paired.
1
Press and hold
"PLEASE PAIR YOUR PHONE PIN 0000"
appears.
2
Default: XX
Search and select this unit model name
(KMM-BT3
**
Bluetooth device.
3
Operate the Bluetooth device to confirm
pairing.
"TESTING" flashes on the display.
The connectivity result (OK or NG) appears after
the test.
PAIRING: Pairing status
HF CNT:
Hands-Free Profile (HFP) compatibility
AUD CNT: Advanced Audio Distribution Profile
(A2DP) compatibility
PB DL:
Phonebook Access profile (PBAP)
compatibility
To cancel test mode, press and hold
turn off the unit.
.
U/ KMR-M3
**
BT) on the
to
Publicité
