Publicité
Les langues disponibles
Les langues disponibles
Step 4: Water Tank Assembly
a. Refer to diagram 4. Position the tank on the tank cart; use the two hems to fix the tank.
b. Connect the UV lamp to the socket at the end of the ballast lead, then insert the UV lamp
into the hole of the UV lamp device and cover the plastic cap.
c. Put the water pump into U-groove inside water tank.
d. Lid tank cover, ensure pump tube, water recycling tube and pump power cord get through
U-groove of tank cover.
e. Pull the power cord of the fan out of the tank bottom.
f. Mount the handle on the stand pole.
DIAGRAM 4
Diagram 4
In order to prevent the spread of
UV light, it is necessary to cover
the plastic cap during installation
26
U-groove
Handle
Publicité
