Publicité
Les langues disponibles
Les langues disponibles
4. FEATURES AND APPLICATIONS
1) Use CAD optimized design with artistic looking.
2) The fan misting system adoptsthe centrifugal atomization optimized design, without
nozzle and water filtration, reasonable structure, easy maintenance.
3) Fan surface is epoxy resin coated,anti-rust and durable.The fan has water proof
electrical design, safety,with tank cart, easy to move.
4) Misting and air supply driven by different motors, motors use high quality rolling
bearings, with stable performance, low temperature rise, long life, low noise, strong
overload.
5) Misting volume adjustable, pumps take full insulation enclosed protective structure
for safe operation.
6) The fan with the function of oscillation and adjustable angle. easy to use, suitable for
factories, residential areas, shopping malls, sports grounds cooling, dedusting, odor
removal, and also can be used in livestock farms, greenhouses, mushroom farms and
special places.
5. PRODUCT BENEFITS
1) Centrifugal misting system means there is no clogged nozzles and no need to use
filtered water.
2) It is equipped with a UV lamp, located in the tank, to sterilise water and prevent the
formation of bacteria (such as legionella, for instance) and mould.
3) Fan surface is epoxy resin coated, anti-rust and durable.
4) The fan electrical components are designed to be waterproof.
5) Safe to use, with tank cart, easy to move.
6) Air supplying and misting functions are driven by different motors. Motors adopt
high quality ball bearings, with advantages of stable, low temperature-rise, long
service life, low noise, and strong overloading ability.
7) Misting volume adjustable, the pump adopts full insulation enclosed protective
structure for safe operation.
8) It has three adjustable speed and the function of left and right oscillation, easy to
use.
9) Designed for cooling large areas such as patios, factories, manufacturing facilities,
garages, athletic fields, greenhouses, live stock breeding farms and more.
6. OPERATION INSTRUCTIONS
1) Use the fan under the voltage and frequency shown on the rating label, do not use
in corrosive environment.
2) When socket is used in power supply, the socket should meet the IEC335-1 standard;
when power liner is from direct power supply, a polarity switch should be installed
with contact gap not less than 3mm on the fixation wiring.
3) Oscillating angle adjustment: Loosen the oscillation screw and move it to the desired
position (the more outward the more bigger oscillation angle), tighten this oscillation
screw after adjustment.
4) Tilting angle adjustment: Loosen the fixing nut and move the motor to the desired
22
Publicité
