Audiovox VME 9425 Mode D'emploi page 116

Hands Free Profile (HFP)
To use a mobile phone with this unit, it is necessary to first establish a connection
using Bluetooth® wireless technology. The connection is normally established using
Hands Free Profile (HFP), which gives you full control of functions available on the
telephone source. However, depending on your phone, the connection may be made
using Head Set Profile (HSP), making some functions unavailable. This is a limitation
of your phone, not the VME 9425.
Since there are a number of Bluetooth® mobile phone implementations available on
the market, operations with your Bluetooth® mobile phone using this unit vary greatly.
Please refer to the instruction manual that came with your Bluetooth® mobile phone
along with this manual while operating your phone with this unit.
Pairing Your Mobile Phone with the Head Unit
Your mobile phone can initiate a search for new devices and pair to the unit. The
following procedure describes the pairing process.
NOTE: The following procedures are generic. Procedures for pairing mobile
phones may vary slightly from phone manufacturer to phone manufacturer.
1. Press the SRC button on the front panel to access the source menu.
2. Touch the BT icon on the source menu and the Bluetooth® user interface screen
will appear.
3. Touch the Options icon and the following screen will appear.
4. On the Options submenu set the Bluetooth function to ON.
5. On the Options submenu set the Connect function to ON.
6. Press the "Pair" button on the head unit's Bluetooth® user interface screen.
7. Access the mobile phone Bluetooth® function and set the function to ON.
8. Set the mobile phone Bluetooth® discover mode to ON.
NOTE: Some discovery modes have a time limit (usually a minute) before
they are automatically turned off.
9. Use the mobile phone's add a new device feature. A device or devices will appear
on your mobile phone display.
116