SurfaceMaxx SGY-PWA1002 Manuel D'instructions page 6

INSTALLATION & PREPARATION
6. Attach the quick connect plug to the quick connect
coupler. (See Figure 6)
7. Attach the quick connect coupler on the other end of
the hose to the inlet plug. (See Figure 7)
8. Take the long outlet pressure hose and starting with
the quick connect plug end slide it through the bottom of
the guide tube on the front of middle handle assembly.
Attach it to the other handle and inlet plug on the spray
bar. (See Figure 8-1 and Figure 8-2)
9. Insert the quick connect coupler of the pressure hose
onto the quick connect plug on the trigger. (See
Figure 9)
Quick Connect
Coupler
Quick
Connect
Plug
Figure 6
Quick Connect
Coupler
Figure 7
Figure 8-1
Quick
Connect
Coupler
Figure 8-2
Figure 9
6
Quick
Connect
Plug
Middle Handle
Outlet
Pressure
Hose
(Long)
Quick
Connect
Plug
Quick Connect Plug
Quick Connect
Coupler
www.surfacemaxx.com