Publicité
Les langues disponibles
Les langues disponibles
English
Product Description
1. Top cover
3. Small drawer
5. Adjustable leg
7. Door
Before using for the first time
- Remove any exterior and interior packaging materials completely, including the adhesive
strips.
- Before it is connected to the mains, the unit must be thoroughly checked for transport
damage, including its power cord.
- Clean the parts of the refrigerator with lukewarm water on a soft cloth or with a neutral
detergent and with clear water, then wipe them dry. Notes: Electric parts of the refrigerator
can only be wiped by dry cloth.
- Turn the thermostat knob on the "3" position and turn on electricity. The compressor and
the light inside the refrigerator begin to work. Close the door and wait 30 minutes. If the
temperature in the freezer compartment decreased obviously, it shows that the refrigerator
system works well.
- When the refrigerator operates for a period of time, the temperature controller will
automatically set the temperature on conditions that the door is not too often opened. If
the above steps are successful, the trial operations are finished. The refrigerator works
normally.
- When the unit is first switched on, a slight 'new' smell may be noticed. However, this will
disappear once the cooling process has begun.
Temperature control (Thermostat)
Caution:
do not attempt to turn it further or it will be damaged.
•
The markings on control knob indicate the "1, 2 ,3 and OFF" for the different temperature
level.
•
"1." is the warmest setting;
•
"3." is the coldest setting;
•
For normal use, please set the control knob to "2" position.
•
The temperature will impact the storage time of food. Too Warm or too cold will both speed
up the spoilage of food.
When the thermostat is turned clockwise to position "3",
6
2. 5x Large drawers
4. Front leg
6. Thermostat
Publicité
