BENOIT SYSTEMS Mini Minotor 2.1 Mode D'emploi page 28

EN
SPECIFICATIONS OF THE LIGHT DRIVE RANGE
WARNING
It is prohibited to modify the equipments without the producer's authorisation.
GENERAL ASSEMBLY VIEW OF THE power units
LIGHT DRIVE MINI 2.1 and LIGHT DRIVE 2.1
TECHNICAL SPECIFICATIONS
Weight of the power unit
Minimum dimensions
Maximum weight of the
Maximum permitted weight for the equipment
(weight of wheelchair + weight of user,
excluding weight of the equipment)
Maximum speed
Maximum safe slope
Maximum crossable obstacle height
Suitable wheelchairs**
* If you exceed this limit, you might damage the frame or fastenings of your equipment, which could cause
serious injuries for you or someone else.
** A compatibility guide is available on our website to know the wheelchair models on which the Light
Drive 2.1 can be installed, in compliance with the general safety and performance requirements set out in
European Regulation 2017/745 on medical devices.
COMPONENTS
Power add-ons consists or four of several components :
THE MOTOR ASSMBLY
Consisting of two or four electric motors fitted with rollers, clutching mecanisms and the battery holder.
SERVICING & MAINTENANCE MANUAL
user*
LIGHT DRIVE PLUS 2.1
8.8 kg (Light Drive Mini and Light Drive) or
16 kg (Light Drive Plus)
Light Drive and Light Drive Mini: 510 x 300 x
275 mm
Light Drive Plus: 510 x 345 x 300 mm
(the height varies depending on the clutch
handle)
120 kg (Light Drive Mini and Light Drive) or
240 kg (Light Drive Plus)
150 kg (Light Drive Mini and Light Drive) or
260 kg (Light Drive Plus)
10 kph
6° (11%)
6 cm (with and without run-up)
Compatible with most manual wheelchairs
28