BaByliss Paris Homelight 930 Mode D'emploi page 63

7.2. Autonomy of your Homelight epilator
With an exceptionally long life, the Homelight epilator flash lamp releases all its light pulses without a decline
in energy.
When the appliance is at the end of its life, the ON/OFF indicator light will turn red.
Do not use the unit if large stains appear inside the flash lamp or if the application
surface is broken. Contact the BaByliss customer service.
8. Trouble shooting
8.1. My Homelight epilator won't start
Ensure the adapter is properly connected to your Homelight epilator and plugged into the mains.
8.2. There are no pulses when I press the release mechanism
Ensure that the application surface is evenly and firmly in contact with your skin and that the 'Ready' indicator
light is flashing; this indicator light guarantees that the appliance is in full contact with your skin. For your safety,
the release switch will be able to release a pulse only if the application surface is firmly pressed against your skin.
Make sure the 'Ready' light is lit.
If after 10 seconds the 'Ready' light is still off, switch your Homelight epilator off and on again by pressing

the 'ON/OFF' button twice.
If the problem persists, contact the BaByliss customer service in your area.

Make sure the 'ON' indicator light is lit.
If it is lit, switch your Homelight epilator off and on again by pressing the 'ON/OFF' button.

If the problem persists, contact the BaByliss customer service in your area.

The 'ON/OFF' indicator light is red and is flashing
The appliance has switched to the safety mode because it has detected that it is overheated or there

is a critical problem (broken fan, capacitor problem, etc.). Under circumstances like these, switch the
appliance off and allow it to cool for 15 minutes before switching it on again.
If the problem persists, contact the BaByliss customer service in your area.

The 'ON/OFF' indicator light will flash green/red alternately.
The adapter being used to connect your Homelight appliance to the mains is not that supplied with

your appliance or it is defective.
If the problem persists, contact the BaByliss customer service in your area

The ON/OFF indicator light is red.
The appliance has reached its end of life.

63