BaByliss Paris Homelight 930 Mode D'emploi page 60

Your facial skin should be shaven, clean and dry with no remnants of a cream or lotion.
Please do not try to remove hair (whether with, for example, an electric epilator or with wax) before using
the Homelight epilator. Epilation (removing hair by its roots) renders pulsed light treatment ineffective.
1. Place the special face filter on the application surface located on the head of your Homelight depilator
before connecting it to the mains and switching it on. To put it in place, carefully take hold of the ends of the
face filter with your thumb and index finger and gently but firmly press it onto the head of the appliance.
Ensure that the filter is correctly positioned.
2. Plug in the unit and press the ON button to switch it on.
3. In about 1.6 second (at level 1) the 'Ready' indicator light will come on. The appliance is now ready to release
the first pulse. The appliance is set to the lowest power setting by default. The power indicator light for
level 1 is lit. To treat the face, it is strongly recommended that you adjust the appliance to the lowest light
intensity: level 1.
4. Please wear safety glasses when using the appliance.
5. Firmly press the applicator surface against your skin so that contact is full. Once the applicator surface is in
full contact with your skin, the 'Ready' indicator light will start to flash.
6. Press the release button. The appliance will release a pulse onto the skin and the 'Ready' indicator light will
go out.
7. Remove the applicator surface from the treated area of skin.
8. Wait 5 seconds then move the applicator surface to another area to be treated. After 1.6 seconds (at level 1),
the 'Ready' indicator light will light up again. The appliance is then ready to release another pulse. Again, wait
5 seconds before moving the applicator surface to another area to be treated.
To treat the face, it is imperative that you wait 5 seconds between flashes.
The duration of the Homelight depilation session on the face should not exceed 10
minutes.
9. To remove the special face filter, switch off the appliance and disconnect it from the mains. Take hold of
the filter by carefully pressing the two ends between your thumb and index finger and remove it from
the head of the appliance. Caution, the appliance surfaces may be hot. Do not touch the special face filter
lens with your fingers.
60