Publicité
Les langues disponibles
Les langues disponibles
en-us Cleaning and maintenance
Part / Material
Suitable cleaning method
Exterior finish /
¡ Clean with soapy water and soft cloth, then
stainless steel
¡ Condition steel with the Bosch Stainless
¡ Hard water spots: Household white vinegar
¡ Mild abrasive cleaners: Bon Ami®
¡ Heat discoloration: Bar Keepers Friend®
Rinse and dry immediately.
Burner grates and
¡ Non-abrasive cleaner: Hot water and
grate bridge /
porcelain enamel on
¡ Mild abrasive cleaners: Bon Ami®
cast iron
¡ Stubborn stains: Soap filled steel wool pads
Rinse and dry immediately.
Igniters / ceramic
¡ Carefully wipe with a cotton swab dampened
¡ Gently scrape the soil off with a toothpick.
1
These marks are registered trademarks of their respective owners. All other trademarks are trademarks of BSH Home
Appliances Corporation or its affiliated companies.
16
rinse and dry with a soft cloth.
Steel Conditioner (part # 00576696). Not for
use on black steel.
detergent, Fantastic®
1
Scrub®
1
with soap and water.
Important notes
¡ Do not use steel wool pads. They will
scratch the surface.
¡ Stainless steel resists most food stains and
pit marks providing the surface is kept clean
and protected.
¡ Never allow food stains or salt to remain on
1
stainless steel for any length of time
1
¡ Rub lightly in the direction of the grain.
¡ Chlorine or chlorine compounds in some
cleaners are corrosive to stainless steel.
Check the ingredients on the label before
using.
¡ The grates are heavy; use care when you lift
them up. Place them on a protected surface
1
, Soft
for cleaning.
¡ Blisters, crazing or chips are common due to
the extreme temperatures on the grate
fingers and rapid temperature changes.
¡ Acidic and sugar-laden spills deteriorate the
enamel. Remove soil immediately after the
appliance has cooled enough to touch.
¡ If you use abrasive cleaners too vigorously
or too often they may eventually mar the
enamel.
¡ Do not clean in a self-cleaning oven.
¡ Avoid excess water on the igniter. A damp
igniter will prevent the burner from lighting.
¡ Remove any lint that may remain after
cleaning.
Publicité
