Climadiff CLV Serie Notice D'utilisation page 56

Subdued reading light (depending on model)
When the door is opened, the switch located under the top panel provides you a low emissive
LED light to make it easier to read labels in a dark room. Don't forget to switch it off after
closing your wine cabinet by pressing the in question.
Shelves
Each cellar has its own type of bottle shelf!
Note that there is no ideal storage arrangement. A collection of bottles of wine is rich when it
is varied. It is up to you to arrange the storage capacity of your wine cellar according to your
collection.
Additional shelves may be ordered as a chargeable option from your retailer or after-sales
service, or from the accessories section of the web site at www.climadiff.com.
Tip: to prevent damage to the door seal, ensure that the door is fully open before pulling out
the shelves to add or remove bottles.
Enhanced safety
Since this range of appliances is intended for storing items of value, we have been careful to
select quality components and to design suitable manufacturing techniques to ensure
optimum safety in operation.
6. LOADING
How to fill and maintain your wine cellar:
Your wine cellar is delivered with one or more wine bottle trays made of metal or wood.
Start by loading the lower part of your wine cellar. Then simply stack the bottles with their
bases facing backward in the back row and conversely for the front row. The bottle shelves
should be arranged according to the size of your wine cellar and the shapes of your wine
bottles. It is very important not to exceed the load limit for each shelf (refer to the load written
inside your cellar). Do not exceed the designated maximum capacity (warning: do not obstruct
the charcoal filter).
In reality and in extreme cases, you could store more bottles by stacking the same type of
bottle without using shelves, but a "varied cellar" comprises a wide variety of bottles and the
56