GYS Toparc MT-125 Mode D'emploi page 10

039254 (x1)
Shield
AT-125 – CUTTING :
037496 (x1)
45A
039292 (x1)
Shield
039308 (x1)
Shield
COMMON DEFECTS ROOT CAUSE
Consumables
Nozzle
Gas
10
039223 (x1)
Protective
shroud
PRECISION CUT
039216 (x1)
039339 (x1)
ohmic
Protective
shroud
039223 (x1)
039445 (x1)
ohmic
Protective
shroud
Consumables are wear parts, it s important to know when to replace them.
Visually: welded or damaged consumables, tip hole larger than 1.5mm, weared electrode, welded pads...
Consequencies: loss of cutting performance, arc striking difficulties...
The nozzle shall be properly tightened so that all parts are correctly fixed. The nozzle shall not be easily turned.
Use compressed air with oil and water filtration.
MT-125 / AT-125
029278 (x5)
105A
039155 (x5)
029285 (x5)
Electrode
125A
Tailpipe
039315 (x5)
45A
039162 (x5)
45A
039155 (x5)
039179 (x5)
Electrode
65A
039186 (x5)
85A
Tailpipe
039193 (x5)
105A
039155 (x5)
039209 (x5)
Electrode
125A
Tailpipe
039148 (x1)
Di user
039506 - 6 m
039513 - 12 m
039131 (x1)
Di user
038479 - 6 m
039520 - 12 m
039148 (x1)
Di user
038479 - 6 m
039520 - 12 m
EN